Top 10 typical forklift mishaps ， forklift procedure should pay attention to these matters ！.
Top 10 typical forklift mishaps ， forklift procedure should pay attention to these matters ！.
Blog Article
Do not undervalue the forklift at the workplace. If the operation is bad, there will certainly be severe mishaps in mins, and there are lots of accidents entailing forklifts.
Case 1: The forklift cargo blocked the motorist's view, and the person ahead might not be located, leading to a moving accident.
Situation 2: In order to maintain the balance of the forklift when raising hefty products, the employees used their body weight as the counterweight, which nearly caused casualties.
Situation 3: The size of the forklift freight surpasses the allowed size of the route and holds on the roadside shelf, which nearly triggers an accident.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Case 5: The forklift driver did not discover the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift lifts the workers unlawfully, the forklift chauffeur does not wear the seat belt, the forklift lifter falls and the driver is squashed when the forklift surrender.
Situation 7: The forklift chauffeur did not use a seat belt and dropped from the automobile when it rolled over and was crushed.
Forklift procedure need to focus on these matters ：.
Start.
1. Prior to beginning, observe the surroundings, and after validating that there are no obstacles that impede the safety of driving, beep the horn initially and after that start.
2. For cars with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge must be secure before starting.
3. When the forklift begins with a lots, the chauffeur needs to first confirm that the lots is stable and reliable.
4. The begin must be sluggish and constant.
Driving.
1. When driving, the height between the bottom end of the fork and the ground need to be kept at 300mm-400mm, and the pole needs to be tilted backwards. .
2. Do not raise the fork expensive when driving. When entering and leaving the task site or while driving, beware that there will certainly be no obstacles in the sky. When the lots is traveling, the fork has to not be increased too expensive, which will certainly impact the security of the forklift. .
3. After dumping, the fork ought to be decreased to the regular driving position before driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal should be issued initially. High-speed sharp turns are restricted. High-speed doglegs will certainly trigger the vehicle to shed lateral stability and tip over. .
5. When the forklift is downhill, it is purely forbidden to switch off the fire and slide, and it is forbidden to brake unexpectedly while driving with loads unless there are unique situations.
6. When the forklift is running, it should comply with the web traffic rules in the manufacturing facility and need to keep a particular safety range from the car in front. .
7. When the forklift is running, the tons must be in the most affordable placement that does not impede the driving, and the gantry must be properly slanted back. The tons will not be increased other than when stacking or loading. .
8. The height of the lots should not obstruct the vehicle driver's sight. In unique situations, when the item impacts the forward vision, drive at a reduced speed when reversing.
9. It is prohibited to turn on the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it should drive safely at a low speed when going into the production workshop location. .
11. When the forklift is lifted, lifted or driven, it is restricted for workers to stand on the fork to hold things and play a balancing duty. .
12. If issues are found, they will be repaired and reported in a timely way, and they will certainly never ever operate with health problems or hide them.
loading and unloading.
1. When fork-loading items, the range between the two forks should be changed as needed to make the load of both forks well balanced and not skewed, and one side of the item must be against the shelf. .
2. It is restricted to collaborate with a solitary fork or make use of a fork top or pull. In special scenarios, security indication have to be established to remind surrounding pedestrians. .
3. In the process of packing and discharging items, the forklift has to be braked with the brake. .
4. The speed of the lorry need to be sluggish and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm individuals. .
5. When using a fork to fork the goods, the fork should be as deep as possible under the tons, and it needs to be kept in mind that the fork tip should not touch various other products or things. The load should be stabilized with very little back tilt of the gantry so that the load does not slide in reverse. The mast can be slanted onward slightly when the load is lowered to enable very easy positioning of the tons and extraction of the forks. .
6. It is prohibited to fork items at broadband and collide with difficult items with the fork head. .
7. When the forklift is functioning, it is restricted for people to loaf the fork, so as to prevent the collapse of the goods and harm people. .
8. Overloading is restricted, and it is restricted to use forks to lift employees to engage in high-altitude operations to stay clear of high-altitude dropping mishaps. .
9. It is not enabled to use the brake inertia to slip, place, round or roll objects. .
10. It is not permitted to make use of forks to choose, turn pallet discharge.
Leaving .
1. It is prohibited to leave the forklift when the items on the fork impend. Before leaving the forklift, you need to unload the goods or reduced the fork frame.
2. Pull the parking brake handle to dead or dispirit the parking brake button.
3. The engine is shut off and the power is removed. (Except for special circumstances, such as the driver does not leave the vehicle's view and does not exceed 1 min).
4. Get rid of the key. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the appearance should be checked, and gas, lubing oil and cooling water should be added.
2. Examine the safety performance of beginning, running and braking.
3. Check whether the lights and horn signals are full and efficient.
4. During the procedure of the forklift, check whether the stress and temperature are regular.
5. After the forklift is running, the outside leak ought to additionally be inspected and the seals should be changed in time.
Forklift Safety Operation Specifications.
1. You should inspect prior to leaving the auto;.
2. When you run into a person before you throughout driving, you should send out a signal at a distance of 5 m;.
3. Electric Forklift Truck for Warehouse The driving speed in the factory does not exceed 5 km/h;.
4. When driving, the low point of the freight should be 0.3 m Electric Forklift Truck for Warehouse ~ 0.4 m in the air;.
5. The turning must not be as well sharp to avoid the propensity of "free turning";.
6. Running up and down the slope should be slow-moving and consistent, and no turning on the slope is allowed.
7. Do not drive throughout the gradient. When the slope is greater than 10%, the lorry must be driven backwards when worsening;.
8. When the forklift employees lug the goods and progress, if they come across huge or heavy products and most likely to the chauffeur's view, they must take the turning around exercise
.
The "Eight Prohibitions" ought to be followed in the operation.
1. Single fork operation is not enabled.
2. It is not permitted to lift the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to utilize inertia force to grab the goods.
6. It is not permitted to utilize stopping pressure to expatriation round or easy-to-roll things.
7. It is not enabled to bring people to work with the pallet or fork, and it is purely restricted to stand under the fork after the fork is increased.
8. Do not drive laterally on slopes
.
Parking is not permitted under the following conditions.
1. Curves, slim roads, railway crossings;.
2. Sections with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the area with the very same size as the barrier ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844